sonde_base

Basic probe. Probes refer to sensors that allow a value or several points of the domain to be monitored over time. The probes may be a set of points defined one by one (keyword Points) or a set of points evenly distributed over a straight segment (keyword Segment) or arranged according to a layout (keyword Plan) or according to a parallelepiped (keyword Volume). The fields allow all the values of a physical value on the domain to be known at several moments in time.

Keywords derived from points

circle

Inherits from: sonde_base

Keyword to define several probes located on a circle.

Parameters:

nbr (type: int) Number of probes between teta1 and teta2 (angles given in degrees).
point_deb (type: un_point) Center of the circle.
[direction] (type: int into [0, 1, 2]) Axis normal to the circle plane (0:x axis, 1:y axis, 2:z axis).
radius (type: float) Radius of the circle.
theta1 (type: float) First angle.
theta2 (type: float) Second angle.

circle_3

Inherits from: sonde_base

Keyword to define several probes located on a circle (in 3-D space).

Parameters:

nbr (type: int) Number of probes between teta1 and teta2 (angles given in degrees).
point_deb (type: un_point) Center of the circle.
direction (type: int into [0, 1, 2]) Axis normal to the circle plane (0:x axis, 1:y axis, 2:z axis).
radius (type: float) Radius of the circle.
theta1 (type: float) First angle.
theta2 (type: float) Second angle.

numero_elem_sur_maitre

Inherits from: sonde_base

Keyword to define a probe at the special element. Useful for min/max sonde.

Parameters:

numero (type: int) element number

plan

Inherits from: sonde_base

Keyword to set the number of probe layout points. The file format is type .lml

Parameters:

nbr (type: int) Number of probes in the first direction.
nbr2 (type: int) Number of probes in the second direction.
point_deb (type: un_point) First point defining the angle. This angle should be positive.
point_fin (type: un_point) Second point defining the angle. This angle should be positive.
point_fin_2 (type: un_point) Third point defining the angle. This angle should be positive.

position_like

Inherits from: sonde_base

Keyword to define a probe at the same position of another probe named autre_sonde.

Parameters:

autre_sonde (type: string) Name of the other probe.

radius

Inherits from: sonde_base

not_set

Parameters:

nbr (type: int) Number of probe points of the segment, evenly distributed.
point_deb (type: un_point) First outer probe segment point.
radius (type: float) not_set
teta1 (type: float) not_set
teta2 (type: float) not_set

segment

Inherits from: sonde_base

Keyword to define the number of probe segment points. The file is arranged in columns.

Parameters:

nbr (type: int) Number of probe points of the segment, evenly distributed.
point_deb (type: un_point) First outer probe segment point.
point_fin (type: un_point) Second outer probe segment point.

segmentfacesx

Inherits from: sonde_base

Segment probe where points are moved to the nearest x faces

Parameters:

nbr (type: int) Number of probe points of the segment, evenly distributed.
point_deb (type: un_point) First outer probe segment point.
point_fin (type: un_point) Second outer probe segment point.

segmentfacesy

Inherits from: sonde_base

Segment probe where points are moved to the nearest y faces

Parameters:

nbr (type: int) Number of probe points of the segment, evenly distributed.
point_deb (type: un_point) First outer probe segment point.
point_fin (type: un_point) Second outer probe segment point.

segmentfacesz

Inherits from: sonde_base

Segment probe where points are moved to the nearest z faces

Parameters:

nbr (type: int) Number of probe points of the segment, evenly distributed.
point_deb (type: un_point) First outer probe segment point.
point_fin (type: un_point) Second outer probe segment point.

volume

Inherits from: sonde_base

Keyword to define the probe volume in a parallelepiped passing through 4 points and the number of probes in each direction.

Parameters:

nbr (type: int) Number of probes in the first direction.
nbr2 (type: int) Number of probes in the second direction.
nbr3 (type: int) Number of probes in the third direction.
point_deb (type: un_point) Point of origin.
point_fin (type: un_point) Point defining the first direction (from point of origin).
point_fin_2 (type: un_point) Point defining the second direction (from point of origin).
point_fin_3 (type: un_point) Point defining the third direction (from point of origin).